Arcam AVR-600 HDMI 1.4 3D Black 120 watts x 7 channel Theater Receiver or preamp

TESTED WORKING ON MY CD PLAYER. APART FROM FEW USED MARKS, IT IS IN GOOD CONDITION. Very heavy item, weights about 30kgs Ref:CD_20 T.

120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz). Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz. Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material. In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2.

Audiophile quality components for best sound quality. Multi-channel 7.1 analogue input for DVD-A or SACD sources. Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources.

9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input). Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone). Zone 3 stereo audio, from analogue inputs.

Linked to Zone 2, volume control independent. Sirius Home Connect compatible input.

Support for iPod via Arcam rLead / rDock (independent of RS232 connection). State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding. Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls. Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master. Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6.

Dolby Volume processing for balancing of program material gain and tonal balance. Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz. 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input.

Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources. USB input for audio file playback from UPnP mass storage devices. Ethernet connection for Internet Radio and audio streaming.

5 HDMI inputs (up to 1080p, Deep Colour). 2 HDMI outputs (up to 1080p, Deep Colour). 5 Component inputs, one monitor output (up to 1080i). 5 S-video inputs, one monitor output, 2 tape outputs.

5 Composite video inputs, one monitor output, 2 tape outputs. Full video up/down conversion & frame rate conversion of all inputs where technically allowed.

Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction. Independent Zone 2 (audio & video), with fixed/variable volume.

Zone 3 audio with fixed/variable volume. RC-5 remote input jacks for all three zones. IR pass through for source components. Full suite of discrete IR RC-5 codes, including separate on / off etc. 12 Volt triggers, on / off for zones 1, 2 and 3.

Full duplex RS232 control input for more complex control systems. Large, high contrast dimmable VFD front. User switchable between 120 & 230Volt.

This item is in the category "Sound & Vision\Home Audio & HiFi Separates\Amplifiers & Pre-Amps". The seller is "abow_92" and is located in this country: GB. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Singapore, Korea, South, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Egypt, Guernsey, Gibraltar, Guadeloupe, French Guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Saudi Arabia, South Africa, United Arab Emirates, Bahamas, Colombia, Jamaica, Kuwait, Panama, Philippines, Qatar, Uruguay.

Brand: Arcam
Colour: Black
Type: Power Amplifier
Number of Channels: 7
Model: AVR600